等离子喷涂TiO2基涂层工艺参数优化研究

目的对TiO_2基涂层的等离子喷涂工艺参数进行优化。方法采用正交实验、基材温度采集并结合涂层微观形貌分析、能谱分析、结合强度试验、显微硬度测试等方法,研究了喷涂电流、喷涂距离、主气流量对涂层组织及性能的影响规律,并获得了优化的喷涂工艺参数。结果涂层分熔融区和部分熔融区,呈现双模结构的混合微观结构特征,截面形貌凹凸不平,并以机械结合为主。拉断后,涂层断裂面呈韧窝状,由陶瓷层到粘结层呈台阶状过渡,陶瓷层整体的内聚结合强度优于陶瓷层与粘结层结合界面的结合强度。涂层条带状夹杂随着粉末流到达基板的温度的增加而减少,对结合强度影响不显著,但对硬度影响较显著。等离子喷涂过程中,粉末流到达基板的温度在一定范围内时,涂层性能随着粉末流到达基板的温度的增加而增加,但粉末流到达基板的温度过大,涂层性能降低。结论获得最优涂层必须采用最优工艺参数,工艺参数对涂层综合性能的影响主次顺序为喷涂电流、喷涂距离、主气流量,得到的优化工艺参数为:喷涂电流350 A,喷涂距离110 mm,主气流量2100 L/h。     

1,5-环辛二烯氯化铱的HPLC法测定

建立了用高效液相色谱分析1,5-环辛二烯氯化铱纯度的方法。以C18色谱柱为固定相,以乙腈/水53/47 (V/V)溶液为流动相,检测波长为285 nm,可以获得满足1,5-环辛二烯氯化铱纯度测定要求的色谱图。在1,5-环辛二烯氯化铱浓度为0.224~0.336 mg/mL时,线性相关系数(r)为0.9993,样品加标回收率为99.13%~101.37%, 相对标准偏差为1.01%。     

An energy‐dissipating approach for adjacent retrofitted structures

The approach of positioning energy dissipaters between adjacent structures can effectively prevent the collision of two adjacent buildings. For adjacent retrofitted structures, an effective strengthening approach that involves implementing energy‐dissipation measures both between and within buildings is proposed. This paper is based on the actual Shanghai ShiMao International Plaza. To avoid having to strengthen most of the structural members, the strengthening measure of energy dissipation is selected because of its construction cost and time constraints. This approach involves replacing several dampers between the adjacent structures and adding viscous damping walls in the retrofitted structure to reduce the seismic response of the retrofitted structure back to the original level. Additionally, a practical calculating method for the equivalent additional damping ratio for the adjacent structures connected by energy dissipaters is proposed. The results show that the effect of energy dissipation in the retrofitted structure is prominent and that the goal of indirect strengthening is achieved. The strengthening approach of energy dissipation and the calculating method of the equivalent additional damping ratio for adjacent structures provide a reference for similar engineering designs.     

Influence of geotextile arrangement on seismic performance of mid-rise buildings subjected to MCE shaking

Geotextile layers make it possible to construct mid-rise buildings sitting on shallow foundations in unfavourable soil conditions; this study investigates how the arrangement of geotextiles affects the seismic performance of mid-rise buildings under Maximum Considered Earthquake (MCE) shaking. The geotextile arrangement considered here includes the stiffness (5000?kN/m – 12000?kN/m), the length with respect to width of the foundation (B) (1B – 4B), the number of geotextile layers (1 – 7 layers), and their spacing (250?mm – 1000?mm). FLAC3D is used for the numerical simulation and to carry out nonlinear dynamic analysis in the time domain, and an inelastic constitutive model is used to simulate the behaviour of the structure and the geotextile layers under seismic loads. Variations in the shear modulus of soil and the corresponding damping ratio with cyclic shear strain are considered using a hysteretic damping algorithm to model the reasonable dissipation of energy in the soil. The interface between the foundation and ground surface, including the material and geometrical nonlinearities, are used to capture any possible slide and uplift in the foundations. The results are presented with regard to the geotextile arrangement considered, and include the tensile force mobilised in the geotextile layers, the response spectra at the bedrock and ground surface, the shear force developed in the structure, the maximum rocking angle of the foundation, permanent foundation settlement, maximum lateral displacement and the maximum and residual inter-storey drifts. The results show that the geotextile layers close to the edges of the foundation sustained most of the stress induced by foundation rocking, and the geotextile arrangement has a significant influence on the seismic response of mid-rise buildings. Thus, to satisfy the seismic performance of buildings and to optimise the design of foundations reinforced with geotextiles, the stiffness, length, number and spacing of the geotextile layers should be designed with great care.     

寒冷地区用空气源热泵热水器准双级压缩循环特性研究

空气源热泵热水器在寒冷地区运行时会出现排气温度过高、制热性能弱等弊端,准双级压缩循环技术可有效改善其在寒冷地区的运行特性。采用带中压补气的转子压缩机,研制了以R410A为循环工质的空气源热泵热水器,试验研究了系统在寒冷地区低温环境下的制热性能。结果表明:带中压补气的空气源热泵热水器系统排气温度较无补气有所降低,当室外温度从7.0下降到-25.0℃时,与无补气系统相比,补气系统制热量提升了6.2%～15.5%,压缩机功率提升了2.8%～9.5%,COP_h提升了3.3%～9.6%。     

Bi@Bi4Ti3O12/TiO2 films on glass with photocatalytic and self-cleaning performance

A stable and translucent Bi@Bi₄Ti₃O₁₂/TiO₂ film was fabricated on conventional glass substrates for the first time. The film exhibited a good photocatalytic performance and efficient self-cleaning capability against organic dyes under full spectral irradiation and visible light irradiation. Bi₄Ti₃O₁₂/TiO₂ film was first prepared on a glass substrate with colloidal silica as a high temperature binder, followed by implantation of nanoscale Bi in it by an in-situ partially reduction of Bi₄Ti₃O₁₂ to generate Bi@Bi₄Ti₃O₁₂/TiO₂ films. The improved photocatalytic ability is probably attributed to the surface plasmon resonance of Bi atom as well as the enhanced electron transfer efficiency and synergistic effect of Bi₄Ti₃O₁₂ and TiO₂. According to trapping experiments, hydroxyl radicals (OH) were active species in the photocatalytic degradation of dyes under full spectral light irradiation and possible photocatalytic mechanism was proposed. The film prepared in this work may well have potential practical applications in many aspects, such as cleansing treatments for high building external decorative panels and also systematic characterization of the film suggests that the in-situ reduction is an effective and simple way to produce nanoscale Bi@Bi₄Ti₃O₁₂.     

高效液相色谱-质谱联用法测定薏苡仁药材中黄曲霉毒素

目的建立高效液相色谱-质谱联用法(high performance liquid chromatography-masss pectrometer,HPLC-MS)测定薏苡仁中药饮片中黄曲霉毒素B_1、B_2、G_1、G_2的方法,并对比不同产地薏苡仁中黄曲霉毒素含量。方法样品经过免疫亲合柱处理后,采用HPLC-MS进行测定。分析柱为C18柱(50 mm×2.1 mm, 1.8μm),流动相为10 mmol/L醋酸铵溶液-甲醇溶液,梯度洗脱,流速为0.3 mL/min,柱温为25℃。结果黄曲霉毒素B_1在0.26～10.4ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9995),平均加样回收率为75.4%～123.9%,黄曲霉毒素B2在0.0875～3.5 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9996),平均加样回收率为71.1%～124.2%,黄曲霉毒素G_1在0.295～11.89 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9995),平均加样回收率为78.9%～112.2%,黄曲霉毒素G2在0.1475～5.9 ng/mL浓度范围内与峰面积值均呈现良好的线性关系(r~2=0.9992),平均加样回收率为73.8%～123.9%。结论该方法准确、可靠、专属性强,通过精确化合物离子监测,可准确的测定薏苡仁中黄曲霉毒素含量。     

面向数据流结构的指令映射优化方法

在高性能计算领域,数据流是一类重要的计算结构,也在很多实际场景表现出很好的性能和适用性。在数据流计算模式中,程序是以数据流图来表示的,数据流计算中一个关键的问题是如何将数据流图映射到多个执行单元上。通过分析现有数据流结构的指令映射方法及其不足,提出了基于数据流结构的新型指令映射优化方法。主要是根据多地址共享数据包的特性对指令映射方法进行优化,延迟多地址共享数据路由包的拆分,减少网络拥堵。